Welcome to Würth Chile For trade customers only

Venta por mayor

Compra a crédito

Sigue en vivo tus pedidos

Precios personalizados

Windscreen/Window adhesive MS3

Windscreen/window adhesive MS3
WNDWADH-MS3-CART-BLCK-290ML

Art.-no. 0890027329
EAN 4061975958204

Prices for customers after login
Windscreen/Window adhesive MS3

Art.-no. 0890027329

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Fast-hardening, high-modulus, non-conductive 1K MS-polymere windscreen adhesive

Suitable for replacement glazing within the passenger, commercial vehicle, and other elastic bonding application



Tested safety


1 hour drive-away time confirmed via crash testing and TÜV certificate pursuant to FMVSS212 (With 2 kingsize airbag, 48km/h speed).



UV & Weather Resistance



Primerless


On aluminium, stainless steel, galvanised steel, zinc, copper, brass, powder coated metal, most lacquered metal surfaces, glass, etc.



User-friendly


No isocyanates or solvents, short cutoff string



High Initial Tack



Non-conductive


Suitable for cars with antennas.

Notice

Test conducted under 20ºC and 50% R.H. This information is only a recommendation based on our experience. Preliminary testing required! For further information, contact consltor.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area
  • MS3 can easily be extruded with a hand- or air pressure gun at temperatures between +5°C and 35°C.

  • Product suitable for the bonding of windscreens in passenger cars, commercial vehicles, etc.

  • Suitable for elastic adhesion and sealing as well as for adhesive bonding of acrylate (PMMA) windscreens in trailers and motor homes.
Instructions

Apply MS3 evenly in the form of a triangular bead to the clean windscreen or body flange holding the gun vertically and starting at the lower section of the windscreen. Then lay in the windscreen and position it and lightly press it into place.

Product weight (per item)

1000.000 g

Technical data
Base material MS Polymer
Test FMVSS212 with a double king-size airbag Past
Density at 20°C 1.4 g/cm³
Volume change (DIN 52451) < 3%
Shore A hardness (DIN 53505) Ca. 60
Elongation at break (DIN 53504) Ca. 300%
E-Modulus (5 - 10%) (DIN 53504) Ca. 5 MPa
Tear propagation (DIN 53515) Ca. 14 N/mm
Skin forming time (20°C/50% R.H.) Ca. 10 min.
Curing speed after 24 hrs (20°C/50%R.H.) Ca. 3.5 mm
Temperature resistance - 40°C till +120°C
Application temperature +5°C till +35°C
Colour Black
Shelf life 18 months

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information